Features & Benefits
P5100
- DC to 250 MHz
- 1000V CAT III (2500 VDC + Peak AC)
- 100x with Readout
Coding
- UL3111-1, EN61010-1, IEC61010-2-031, CSA1010.1, CSA1010.2.031
- 7-30 pF Compensation Range
P5102
- DC to 100 MHz
- 1,000 VRMS CAT II
- Floatable
up to 600 VRMS CAT II or 300 VRMS CAT III
- 10x
- For THS700 Series
- UL3111-1, EN61010-1,
IEC61010-2-031, CSA1010.1, CSA1010.2.031
P5120
- DC to 200 MHz
- 1,000 VRMS CAT II
- Floatable up to 600 VRMS CAT II or 300 VRMS CAT III
- 20x
- 15 to 25 pF Compensation Range
- For TPS2000 Series
- UL61010B-2-031, EN61010-2-031, IEC61010-2-031,
CSA61010.2.031
P6015A
- High Voltage -
20 kVDC / 40 kV Peak (100 ms Pulse Width)
- High Bandwidth
- 75 MHz
- Silicone Dielectric
- Optional 1,000x Readout
Coding
- Wide Compensation Range (7-49 pF)
- Heavy-duty Versatile
Ground Lead and Alligator Clip
Applications
- Power Supply Design
- Design Motor Drive
- Electronic Ballast
- Power Semiconductors
- Switch Mode Control
- UPS Systems
- Power Converters
P5100
High-voltage Probe
The P5100 is a low-input capacitance High-voltage
Probe (2.5 kV) designed for higher frequency applications. The probe
can be compensated to match plug-ins and oscilloscopes with nominal
input capacitances of 7-30 pF. A variety of screw-on accessories provide
easy connection to the device under test.
P5102 and P5120
IsolatedChannel™ Applications
In many applications, it is
important to be able to isolate the measurement from earth ground
and also to isolate the common voltage between channels. The P5102,
paired with the THS700 Series handheld digital storage oscilloscopes,
and the P5120, coupled with the TPS2000 Series digital storage oscilloscopes,
deliver both the isolation for the measurement from earth ground and
full isolation between the channels.
The 100 MHz P5102 is designed
to give you isolated channel performance for up to 1,000 VRMS CAT II when used with the THS700 Series oscilloscopes. The 200 MHz
P5120 passive high-voltage probe, for use with the TPS2000 Series
oscilloscopes, is designed to give you up to 1,000 VRMS CAT II of isolated channel performance. A variety of screw-on adapters
are available for easy connection to the device under test.
P6015A High-voltage Probe
For heavy-duty high-performance
measurements of voltages over 2.5 kV, the P6015A is the industry standard.
You can measure DC voltages up to 20 kVRMS and pulses up
to 40 kV (pk, 100 ms duration). The 75 MHz bandwidth enables you to
capture fast, high-voltage signals.
The P6015A uses an environmentally
safe silicone compound for a dielectric and never needs refilling.
Other features include: A 7-49 pF compensation range, small compensation
box that fits on adjacent amplifier inputs, and a readout option for
use with most Tektronix digital scopes. With the readout option, displayed
voltage amplitude values will be the actual signal value rather than
understated by a factor of 1,000.
Note: Using the readout
version with other than Tektronix digital scopes may result in an
erroneous readout display.
P6015A
Ordering Information
P5100
100x, 10 ft.
High-voltage Probe.
Includes: Cable markers set, 1 ea.
crocodile clip, 1 ea. adjustment tool, 1 ea. hooktip (small), 1 ea.
hooktip (large), 1 ea. 18 in. ground lead, 1 ea. 6 in. ground lead,
instruction manual (070-8151-04).
Recommended Accessories
Probe Tip to BNC Adapter - Order 013-0291-xx.
0.080 in. Diameter Spring Tip - Order 206-0060-xx.
P5102
10x, High-voltage Probe for THS700 Series.
Includes: Large retractable hook tip, small retractable hook
tip, 6 in. common lead, 18 in. common lead, large crocodile clip,
colored cable markers, adjustment tool, Instruction Manual (070-9294-xx).
P5120
20x, High-voltage Probe for TPS2000 Series.
Includes: Large retractable hook tip, small retractable
hook tip, 6 in. common lead, 18 in. common lead, large crocodile clip,
colored cable markers, adjustment tool, instruction manual (071-1463-xx).
Recommended Accessories for P5100, P5102, P5120:
See
P5100, P5102, P5120 Probe Accessories.
P6015A
1,000x, 10 ft. High-voltage Probe.
Includes: Hook probe tip (206-0463-xx); banana plug tip (134-0016-xx);
crocodile clip - plugs onto ground lead (344-0461-xx); ground lead
(196-3363-xx); carrying case (016-1147-xx); instruction manual (070-8223-xx).
Opt. 1R - 10 ft. with readout.
Opt. 25 - 25 ft. without readout.
Opt. 2R - 25 ft. with readout.
Service (P6015 only)
Opt. C3 - Calibration
Service 3 Years.
Opt. C5 - Calibration Service 5 Years.
Opt. D1 - Calibration Data Report
Opt. D3
- Calibration Data Report 3 Years (with Opt. C3).
Opt.
D5 - Calibration Data Report 5 Years (with Opt. C5).
Opt. R3 - Repair Service 3 Years.
Opt. R5 - Repair
Service 5 Years.
