Features & Benefits
- Broad Wavelength Response 500
to 950 nm or 1100 to 1700 nm
- High-bandwidth DC up to 1.2 GHz
- High Gain 1 V/mW
- Low Noise <11 pW/√Hz
- Probe
Connects to DPO7000*1 and DSA/DPO700000*2 Series
and Earlier Series with TekProbe® Interface or Other 50 Ω
Instruments with the 1103 TekProbe® Power Supply
- SONET/SDH and Fibre Channel Reference Receiver Performance:TDS500C/700C
(Opt. 3C or 4C)P6701B – Fibre Channel up to 1063 Mb/sP6703B – SONET/SDH
up to 622 Mb/s
Applications
- Eye Pattern Testing of Optical
Communication Signals(SONET/SDH and Fibre Channel)
The
Tektronix P6700 Series optical-to-electrical (O/E) converters change
optical signals into electrical signals for convenient analysis on
Tektronix DPO7000 and DPO/DSA70000 Series oscilloscopes with appropriate
adapters (see footnote 1 and 2), or any other Tektronix oscilloscope
equipped with a TekProbe interface or when used with the 1103 TekProbe
power supply. The P6700 Series O/E converters are ideal for optical
source characterization in the development, manufacture, or service
of optical communication systems and devices.
Small, conveniently
packaged P6701B and P6703B optical-to-electrical analog converters
provide an accurate interface for optical pulse shape measurements.
The high gain, large dynamic range, and stable output offset of these
O/E converters make them ideal for performing Eye Pattern analysis
and extinction measurements.
The P6701B/P6703B optical input
is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using
the standard assortment of hybrid fiber-optic mating sleeves, these
O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination,
and correct units (microwatts) when used with Tektronix DPO7000 or
DPO/DSA70000 and earlier TekProbe-equipped Series oscilloscopes.
*1 Requires the TPA-BNC adapter.
*2 Requires the TCA-BNC adapter.
OC-3/STM-1 SONET/SDH
transmitter Eye Pattern test.
P6701B: Typical wavelength-dependent gain (at 25 °C).
P6703B: Typical wavelength-dependent gain (at
25 °C).
The standard P6701B has a nominal frequency
response which follows the fourth-order Bessel-Thompson for Fibre
Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect
these products to the DSA8200 Series sampling oscilloscopes.
Ordering Information
P6701B
Optical-to-electrical
Converter with FC/PC Connector.
Includes: Hard Case,
User Manual (English, French, German, and Japanese), Assorted Fiber-optic
Hybrid Connectors (FC/FC, FC/ST, and FC/SC), Certificate of Traceable
Calibration.
P6703B
Optical-to-electrical Converter
with FC/PC Connector.
Includes: Hard Case, User Manual
(English, French, German, and Japanese), Assorted Fiber-optic Hybrid
Connectors (FC/FC, FC/ST, and FC/SC), Certificate of Traceable Calibration.
Service
Opt. C3 - Calibration Service 3 Years.
Opt. C5 - Calibration Service 5 Years.
Opt.
D1 - Calibration Data Report.
Opt. D3 - Calibration
Data Report 3 Years (with Opt. C3).
Opt. D5 - Calibration
Data Report 5 Years (with Opt. C5).
Opt. R3 - Repair
Service 3 Years.
Opt. R5 - Repair Service 5 Years.
Power Supply
1103 - TekProbe Power Supply. Please
specify power plug when ordering.
Power Plug Options
Opt. A0 - US Plug, 115 V, 60 Hz.
Opt. A1 - Euro Plug, 220 V, 50 Hz.
Opt. A2 - UK Plug, 240 V,
50 Hz.
Opt. A3 - Australian Plug, 240 V, 50 Hz.
Opt. A5 - Swiss Plug, 220 V, 50 Hz.
Accessories
Single Mode Fiber-optic Cables - (9 μm).
FC/PC to FC/PC:
Order 174-1387-xx.
FC/PC to ST: Order 174-1386-xx.
FC/PC
to SC/PC: Order 174-3921-xx.
FC/PC to Diamond (2.5): Order
174-1497-xx.
FC/PC to Diamond (3.5): Order 174-1385-xx.
Multi Mode Fiber-optic Cables - (62.5 μm)
FC/PC
to FC/PC: Order 174-2322-xx.
FC/PC to SC/PC: Order 174-4093-xx.
FC/PC to SMA: Order 174-2324-xx.
90/10, 3-port
Single Mode Optical Splitter FC/PC Connectors - Order 174-3737-xx.
10 dB, Inline Single Mode Optical Attenuator FC/PC Connectors
- Order 119-5118-xx.
DIN/FC Fiber-optic Hybrid Connector
- Order 020-2209-xx.
