|
|
|
HDMI Compliance Test Software
TDSHT3
|
Features & Benefits
- Fast, Efficient Direct Synthesis
Solution
- Conformance to HDMI 1.4 Standards and Compliance
Test Specification 1.4 (CTS)
- Complete Validation to Standards
with Wide Range of Tests for Source, Sink, and Cable Devices
- Accurate Source Tests using Precise Measurement Techniques
- Dependable Sink Tests with Closed-loop Measurements that Eliminate
Nonlinearities in Test Setup
- Automation of Complex Sink and
Cable Tests with Remote Control of Signal Sources and Software Emulation
of Cable Effects, Eliminating the Need for Hardware Transition Time
Converters (TTC) and Cable Emulators
- Quick Results with Automatic
Mask-Fit, Measurements and Pass/Fail Notification, and In-depth Results
with Statistical Analysis and Mask Margins
- Quick Testing
with One-button Selection of Multiple Tests and CSV-format Test Summary
and Reports
- Comprehensive HDMI 1.4 Solution including Test
Fixtures, DPO/DSA70000B Real-Time Oscilloscopes, P7313SMA Differential
Probes, AWG7000B Signal Sources, HDMI Fixtures, and DSA8200 Sampling
Oscilloscopes
Applications
- Design and Validation of
HDMI 1.4 Physical Layer
HDMI
Physical Layer Compliance Testing
Engineers designing and
validating the HDMI physical layer of their devices face constant
pressure to improve efficiency. Designers need to perform a wide range
of compliance tests quickly and reliably right on their bench.
HDMI 1.4 introduces Automotive HDMI (Type E) in addition to Mobile
HDMI (Type D), HEAC, 3D HDMI, 4K × 2K patterns, and new Calorimetric
patterns, all operating up to 3.4 Gb/s. TDSHT3 and HT3-DS HDMI Compliance
Test Software automate a comprehensive range of tests enabling unprecedented
efficiency with reliable results.
Reliable and Dependable
Results
Complete Sink Test Automation
TDSHT3 embeds the HDMI CTS 1.4 compliance test procedures, including
the software clock recovery (SoftCRU), ensuring dependable results.
Accurate eye rendering and precise violation testing deliver credible
results. Perform accurate sink tests with closed-loop measurements
that eliminate nonlinearities of the test setup. Authentic measurement
techniques and automation eliminate errors to provide repeatable results.
Option HT3-DS enables the innovative Direct Synthesis Solution
for sink and cable eye-diagram testing. The Direct Synthesis method
ensures greater repeatability as it eliminates the requirement for
hardware TTC filters and cable emulators. HT3-DS supports all cable
emulator effects (Type 1, Type 2, Type 3, and Type E).
Faster
Validation Cycles
The unparalleled automation offered on the
TDSHT3 and HT3-DS enables faster validation. Reduce test times for
complete HDMI sink testing with TDSHT3 and HT3-DS by digitally controlling
cable emulator and TTC effects allowing for a single hardware connection
for all resolutions. Demonstrate efficiency by using the “Select All”
feature to perform multiple tests. Quickly generate CSV-format summaries
or detailed reports at a press of a button.
Characteristics
|
Test
|
Description
|
|
Source Tests
|
|
Eye Diagram*1
|
PLL, Raw, and Ideal clock
|
|
Clock Jitter*1
|
PLL, Raw, and Ideal clock
|
|
Clock Duty Cycle
|
|
|
Rise Time and Fall Time
|
|
|
Inter-pair Skew
|
Data-Data
|
|
Low Amplitude
|
|
|
Sink Tests
|
|
Jitter Tolerance*1
|
|
Jitter frequencies
(D/CK)
|
500 kHz/10 MHz or 1 MHz/7 MHz
|
|
DUT frequency
(pixel clock)
|
25.125, 27, 74.25, 148.5, 165, 225, 297, 330 MHz
|
|
Direct Synthesis Solution provides selection
of cable emulators’ emulation in the software. 1st Cable Emulator
or 2nd Cable Emulator or Both.
Covering the various
Type 1, Type 2, Type 3, and Type E cable emulators required in CTS
1.4 as per resolution selection.
|
|
Min/Max Differential Swing Tolerance
|
250 mV - 70 mV, 20 mV steps. Direct Synthesis setup can also
be used for this test
|
|
Intra-pair Skew
|
<1 ns, 0.1 Tbit steps. Direct Synthesis setup
can also be used for this test
|
|
Deep Color Tests
|
Selection under Direct Synthesis method
|
|
Cable Tests
|
|
Eye Diagram*1
|
TP1 and TP2. Direct Synthesis setup can also be used for this
test
|
|
Repeater Cable Inter-pair Skew Test
|
Selection under Direct Synthesis method only
|
*1 Requires record length of more than
16 M on each channel.
Tektronix Real-Time Oscilloscopes Supported
DPO/DSA70804/B, DPO/DSA71254/B, DPO/DSA71604/B, DPO/DSA72004/B
Real-Time Oscilloscopes support both HT3 and HT3-DS.
TDS6K/7K/B
Series of Real-Time Oscilloscopes support HT3 only and cannot support
HT3-DS.
Tektronix Generators Supported
Data Timing
Generator Method:
Test Pattern Generation – DTG 5334 or
DTG5274*3, DTGM30 (Qty: 3), and DTGM32*2 (for
Sink Tests).
Jitter Generation (for use with DTG method) –
AWG7102 with Opt. 01 and 06, AWG7122B with Opt. 01, 06, and 08, AWG710/B
(for Sink Tests).
Direct Synthesis Method:
AWG7122B w/ Opt. 01, 06, and 08 (Qty: 2).
AFG3102 or AFG3252
– Used for synchronizing and triggering the 2 AWGs in the Direct Synthesis
setup.
Tektronix Sampling Oscilloscopes Supported
TDR Tests:
Oscilloscope – DSA8200 or TDS8000B with
80E03 and 80E04 modules.
*2 The DGM32 module is
needed for tests with clock rates >148.5 MHz and is required only
when AWG710/B is used. It is not needed if AWG7102 is used.
*3 DTG5274 can be used to test HDMI clock rates up to
270 MHz only.
Ordering Information
Test Software
Includes: Application CD, HDMI Direct Synthesis AWG Patterns
DVDs, and electronic documentation.
|
Product/Feature
|
Description
|
|
To Order Along with Oscilloscope
|
|
Opt. HT3
|
HDMI Compliance Test Software
|
|
Opt. HT3-DS
|
HDMI Direct Synthesis Software (requires Opt. HT3)
|
|
To Upgrade Existing Oscilloscope
|
|
DPO70000/B
|
Order DPO70UP – Opt. HT3
|
|
DSA70000/B
|
Order DSA70UP – Opt. HT3
|
|
DPO70000/B
|
Order DPO70UP – Opt. HT3-DS*4
|
|
DSA70000/B
|
Order DSA70UP – Opt. HT3-DS
|
|
TDS6000B/TDS6000C
|
Order TDS6BUP – Opt. HT3
|
|
TDS7000/B
|
Order TDS7UP/7BUP – Opt. HT3
|
|
CSA7000/B
|
Order CSA7UP/CSA7BUP – Opt. HT3
|
*4 HT3-DS is available on DPO/DSA70000/B
Series scopes with bandwidth greater than 8 GHz.
Recommended
Accessories and Options Needed
|
Accessory
|
Description
|
|
HDMI Direct Synthesis Accessory Kit (is required with Opt.
HT3-DS)
|
Consists of:
Minicircuits Bias Tees (ZX85-12G-S+) (Qty:
8)
Matched SMA cables (174-4944-xx) (Qty: 10)
Picosecond
Pulse labs TTC filter (5915-110-120PS) (Qty: 8)
BNC cables
(012-0057-xx) (Qty: 4)
BNC-T adapter (015-1016-xx) (Qty: 1)
GPIB Cables from NI (763061-xx)
6 dB attenuator from mini
circuits (BW-S6W2+) (Qty: 8)
|
|
Oscilloscope
|
16 M Record Length/Ch or more – Opt. 2XL on DPO70000B oscilloscopes
(for eye diagram and jitter tests)
|
|
Signal Sources
|
DTG5334 (for DTG-based method)
AWG7102 needs Option
01 and 06
AWG7122B needs Option 01, 06, and 08 (for Direct
Synthesis method)
|
|
Probes
|
|
Differential probes
|
P7350SMA (2 probes required) – for testing TMDS clock rates
less than or equal to 74.25 MHz
P7313 SMA (minimum 2 probes
required) – for testing all resolutions (recommended for 1.4 specs
testing) is also used for single-ended testing
|
|
Active probes
|
P7240 used with old 1.2 test fixtures (2 probes required);
P7313SMA probes can also be used to test single-ended tests using
50 ohms short
|
|
Probe positioner
|
PPM100 Flexible Arm Probe Positioner
|
Tektronix Fixtures for HDMI
HDMI Type
A Fixtures
- ET-HDMI-TPA-S Test Adapter Set (used
for source, sink, and cable testing) includes the following:
- 1 HDMI-TPA-P plug board with SMA cables
- 1 HDMI-TPA-R
receptacle board with SMA cables
- 1 HDMI-TPA-C calibration
board with SMA cables
- 1 HDMI-TPA-E EEPROM board
- 29 SMA-to-GPPO cables 2 inches long
- ET-HDMI-TPA-STX
Test Adapter Set (used for source testing only) includes the following:
- 1 HDMI-TPA-P plug board with SMA cables
- 1 HDMI-TPA-E
EEPROM board
- 10 SMA-to-GPPO cables 2 inches long
HDMI Type C Fixtures
- ET-HDMIC-TPA-S
Test Adapter Set (used for source, sink, and cable testing) includes
the following:
- 1 HDMI-TPA-P plug board with SMA cables
- 1 HDMI-TPA-R receptacle board with SMA cables
- 1 HDMI-TPA-C
calibration board with SMA cables
- 1 HDMI-TPA-E EEPROM board
- 29 SMA-to-GPPO cables 2 inches long
- ET-HDMIC-TPA-STX
Test Adapter Set (used for Source testing only) includes the following:
- 1 HDMI-TPA-P plug board with SMA cables
- 1 HDMI-TPA-E
EEPROM board
- 10 SMA-to-GPPO cables 2 inches long
HDMI Type D Fixtures for Mobile HDMI
- TF-HDMID-TPA-KIT Test Adapter Kit (used for Type D and Type D HEAC
source, sink, and cable testing) includes the following:
- 1 TF-HDMID-TPA-P plug board
- 2 TF-HDMID-TPA-R receptacle
boards
- TF-HDMI-TPA-CE consisting of:
- EDID Fixture PCBA
- EEPROM with HDMI 1.4 Software
- Ribbon Cable (174-5746-xx)
- Customer Documentation
HDMI Type E Fixtures for Automotive HDMI
- TF-HDMIE-TPA-KIT Test Adapter Kit (used for source, sink, and
cable testing) includes the following:
- 1 TF-HDMIE-TPA-P
plug board
- 2 TF-HDMIE-TPA-R receptacle boards
- TF-HDMI-TPA-CE consisting of:
- EDID Fixture PCBA
- EEPROM with HDMI 1.4 Software
- Ribbon Cable (174-5746-xx)
- Customer Documentation
TYPE A PLUG
Fixture
TYPE C PLUG Fixture
TYPE D Fixture set
TYPE E Fixture set
Sink Test
Automation
|
Product
|
Description
|
|
NI GPIB-USB-A/B
|
USB-to-GPIB controller (with driver software)
|
|
NI GPIB-ENET/100
|
Ethernet GPIB Controller (with driver software)
|
For ordering, contact National Instruments (ni.com).
|
|
Product(s) are manufactured in ISO registered facilities.
|
|
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C,
and with Tektronix Standard Codes and Formats.
|
61W-17935-5, 09-NOV-2009
|
|
 |
(WebID: 13548)
|
