|
|
|
混合訊號示波器
MSO4000 系列、DPO4000 系列產品規格表
|
功能與特色關鍵效能規格- 1 GHz、500 MHz 及350 MHz 三種頻寬的機型
- 2 或4 通道
- 16 個數位通道 (MSO 系列)
- 所有通道的取樣率高達5 GS/s
- 所有通道皆擁有10 M 取樣記錄長度
- 大於50,000 wfm/s 的最大波形擷取率
- 先進的觸發套件
操作簡易的功能- Wave Inspector® 控制功能提供前所未有的波形分析效率
- 29 種自動量測功能和FFT 分析，簡化波形分析作業
- TekVPI® 探棒介面支援可自動調整比例及單位的主動式、差動式及電流探棒
- 10.4 吋 (26.4 公分) 的XGA 彩色顯示器
- 機體輕巧 - 深度僅5.4 吋 (13.7 公分) 且重量僅11 磅(5 公斤)
串列觸發與分析 (選購)- 選購配備 - I2C、SPI、CAN、LIN、FlexRay、RS-232/422/485/UART 和I2S/LJ/RJ/TDM 自動串列觸發、解碼和搜尋
混合訊號設計與分析 (MSO 系列)- 並列匯流排的自動觸發、解碼和搜尋
- 每個通道臨界值的設定
- 多通道設定與保持觸發
- MagniVu™高速擷取功能提供數位通道60.6 ps 清晰時序解析度
應用支援 (選購)電路設計驗證與除錯的新典範有了MSO/DPO400 系列示波器，您便可以使用一部儀器來分析 多達20 個類比和數位訊號，以快速找出及診斷複雜設計的問 題。在所有通道上高達1 GHz 頻寬和最低5 倍的超取樣，確保 您具備需要看到快速變化的訊號細節之效能。為了在擷取長時間 訊號時保持精密的時序準確度，MSO/DPO4000 在所有通道上 提供了10 Mpoint 標準深記錄長度。 Tektronix 的MSO/DPO4000 系列示波器具備Wave Inspector® 控制功能，可進行快速波形瀏覽、自動串列和並行匯流排分析， 以及自動功率分析，此功能豐富的工具能滿足您簡化並加速複雜 設計除錯所需。 完整功能加速設計每一階段的除錯MSO/DPO4000 系列提供一系列強大的功能，加速您設計每一 個階段的除錯，從迅速找出一個異常訊號並擷取它，到搜尋事件 的波形記錄及分析其特性和裝置行為。 
Discover – Fast waveform capture rate - over 50,000 wfm/s - maximizes the probability of capturing elusive glitches and other infrequent events.
DiscoverTo debug a design problem, first you must know it exists. Every design engineer spends time looking for problems in their design, a time-consuming and frustrating task without the right debug tools. The MSO/DPO4000 Series offers the industry’s most complete visualization of signals, providing fast insight into the real operation of your device. A fast waveform capture rate - greater than 50,000 waveforms per second - enables you to see glitches and other infrequent transients within seconds, revealing the true nature of device faults. A digital phosphor display with intensity grading shows the history of a signal’s activity by intensifying areas of the signal that occur more frequently, providing a visual display of just how often anomalies occur. 
Capture – Triggering on a specific transmit data packet going across an RS-232 bus. A complete set of triggers, including triggers for specific serial packet content, ensures you quickly capture your event of interest.
CaptureDiscovering a device fault is only the first step. Next, you must capture the event of interest to identify root cause. The MSO/DPO4000 Series provides a complete set of triggers - including runt, logic, pulse width/glitch, setup/hold violation, serial packet, and parallel data - to help quickly find your event. With up to a 10 Mpoint record length, you can capture many events of interest, even thousands of serial packets, in a single acquisition for further analysis while maintaining high resolution to zoom in on fine signal details. From triggering on specific packet content to automatic decode in multiple data formats, the MSO/DPO4000 Series provides integrated support for the industry’s broadest range of serial buses – I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, and I2S/LJ/RJ/TDM. The ability to decode up to four serial and/or parallel buses simultaneously means you gain insight into system-level problems quickly. To further help troubleshoot system-level interactions in complex embedded systems, the MSO4000 Series offers 16 digital channels in addition to its analog channels. Since the digital channels are fully integrated into the oscilloscope, you can trigger across all input channels, automatically time-correlating all analog, digital, and serial signals. The MagniVu™ high-speed acquisition enables you to acquire fine signal detail (up to 60.6 ps resolution) around the trigger point for precision measurements. MagniVu is essential for making accurate timing measurements for setup and hold measurements, clock delay, signal skew, and glitch characterization. 
Search – I2C decode showing results from a Wave Inspector search for Address value 50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating waveform data.
SearchFinding your event of interest in a long waveform record can be time consuming without the right search tools. With today’s record lengths pushing beyond a million data points, locating your event can mean scrolling through thousands of screens of signal activity. The MSO/DPO4000 Series offers the industry’s most comprehensive search and waveform navigation with its innovative Wave Inspector® controls. These controls speed panning and zooming through your record. With a unique force-feedback system, you can move from one end of your record to the other in just seconds. User marks allow you to mark any location that you may want to reference later for further investigation. Or, automatically search your record for criteria you define. Wave Inspector will instantly search your entire record, including analog, digital, and serial bus data. Along the way it will automatically mark every occurrence of your defined event so you can quickly move between events. 
Analyze – FFT analysis of a pulsed signal. A comprehensive set of integrated analysis tools speeds verification of your design’s performance.
AnalyzeVerifying that your prototype’s performance matches simulations and meets the project’s design goals requires analyzing its behavior. Tasks can range from simple checks of rise times and pulse widths to sophisticated power loss analysis and investigation of noise sources. The MSO/DPO4000 Series offers a comprehensive set of integrated analysis tools including waveform- and screen-based cursors, 29 automated measurements, advanced waveform math including arbitrary equation editing, FFT analysis, and trend plots for visually determining how a measurement is changing over time. Specialized application support for serial bus analysis, power supply design, and video design and development is also available. For extended analysis, National Instrument’s LabVIEW SignalExpress™ Tektronix Edition provides over 200 built-in functions including time and frequency domain analysis, limit testing, data logging, and customizable reports. 
Wave Inspector controls provide unprecedented efficiency in viewing, navigating, and analyzing waveform data. Zip through your 10 Mpoint record by turning the outer pan control (1). Get from the beginning to end in seconds. See something of interest and want to see more details? Just turn the inner zoom control (2).
Wave Inspector® Navigation and SearchA 10 Mpoint record length represents thousands of screens of information. The MSO/DPO4000 Series enables you to find your event in seconds with Wave Inspector, the industry’s best tool for navigation and search. Wave Inspector offers the following innovative controls: Zoom/PanA dedicated, two-tier front-panel control provides intuitive control of both zooming and panning. The inner control adjusts the zoom factor (or zoom scale); turning it clockwise activates zoom and goes to progressively higher zoom factors, while turning it counterclockwise results in lower zoom factors and eventually turning zoom off. No longer do you need to navigate through multiple menus to adjust your zoom view. The outer control pans the zoom box across the waveform to quickly get to the portion of waveform you are interested in. The outer control also utilizes force-feedback to determine how fast to pan on the waveform. The farther you turn the outer control, the faster the zoom box moves. Pan direction is changed by simply turning the control the other way. Play/PauseA dedicated Play/Pause front-panel button scrolls the waveform across the display automatically while you look for anomalies or an event of interest. Playback speed and direction are controlled using the intuitive pan control. Once again, turning the control further makes the waveform scroll faster and changing direction is as simple as turning the control the other way. 
Search step 1: You define what you would like to find.
Search step 2: Wave Inspector automatically searches through the record and marks each event with a hollow white triangle. You can then use the Previous and Next buttons to jump from one event to the next.
User MarksPress the Set Mark front-panel button to place one or more marks on the waveform. Navigating between marks is as simple as pressing the Previous (←) and Next (→) buttons on the front panel. Search MarksThe Search button allows you to automatically search through your long acquisition looking for user-defined events. All occurrences of the event are highlighted with search marks and are easily navigated to, using the front-panel Previous (←) and Next (→) buttons. Search types include edge, pulse width/glitch, runt, logic, setup and hold, rise/fall time parallel bus, and I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, and I2S/LJ/RJ/TDM packet content. 
Digital phosphor technology enables greater than 50,000 wfm/s waveform capture rate and real-time intensity grading on the MSO/DPO4000 Series.
Digital Phosphor TechnologyThe MSO/DPO4000 Series’ digital phosphor technology provides you with fast insight into the real operation of your device. Its fast waveform capture rate – greater than 50,000 wfm/s – gives you a high probability of quickly seeing the infrequent problems common in digital systems: runt pulses, glitches, timing issues, and more. Waveforms are superimposed with one another and waveform points that occur more frequently are intensified. This quickly highlights the events that over time occur more often or, in the case of infrequent anomalies, occur less often. With the MSO/DPO4000 Series, you can choose infinite persistence or variable persistence, determining how long the previous waveform acquisitions stay on screen. This allows you to determine how often an anomaly is occurring. 
The MSO Series provides 16 integrated digital channels enabling you to view and analyze time-correlated analog and digital signals.
Mixed Signal Design and Analysis(MSO Series)The MSO4000 Series Mixed Signal Oscilloscopes provide 16 digital channels. These channels are tightly integrated into the oscilloscope's user interface, simplifying operation and making it possible to solve mixed-signal issues easily. 
With the color-coded digital waveform display, groups are created by simply placing digital channels together on the screen, allowing the digital channels to be moved as a group. You can set threshold values for each channel, enabling support for up to 16 different logic families.
Color-coded Digital Waveform DisplayThe MSO4000 Series has redefined the way you view digital waveforms. One common problem shared by both logic analyzers and mixed-signal oscilloscopes is determining if data is a one or a zero when zoomed in far enough that the digital trace stays flat all the way across the display. The MSO4000 Series has color-coded digital traces, displaying ones in green and zeros in blue. 
White edges indicate additional information is available by zooming in. As shown here, zooming in on the white edge reveals a hidden glitch.
The multiple transition detection hardware of the MSO4000 Series will show you a white edge on the display when the system detects multiple transitions. White edges indicate that more information is available by zooming in or acquiring at faster sampling rates. In most cases zooming in will reveal the pulse that was not viewable with the previous settings. If the white edge is still present after zooming in as far as possible, this indicates that increasing the sample rate on the next acquisition will reveal higher frequency information than the previous settings could acquire. The MSO4000 Series simplifies channel setup by allowing you to group digital waveforms and enter waveform labels by using a USB keyboard. By simply placing digital waveforms next to each other, they form a group. Once a group is formed, you can position all the channels contained in that group collectively. This greatly reduces the normal setup time associated with positioning channels individually. 
The MagniVu high-resolution record provides 60.6 ps timing resolution, enabling you to make critical timing measurements on your digital waveforms.
MagniVu™ High-speed AcquisitionThe main digital acquisition mode on the MSO4000 Series will capture up to 10 Mpoints at 500 MS/s (2 ns resolution). In addition to the main record, the MSO4000 provides an ultra high-resolution record called MagniVu which acquires 10,000 points at up to 16.5 GS/s (60.6 ps resolution). Both main and MagniVu waveforms are acquired on every trigger and can be switched between in the display at any time, running or stopped. MagniVu provides significantly finer timing resolution than comparable MSOs on the market, instilling confidence when making critical timing measurements on digital waveforms. 
The P6516 MSO probe offers two eight-channel pods to simplify connecting to your device.
P6516 MSO ProbeThis unique probe design offers two eight-channel pods. Each channel ends with a probe tip featuring a recessed ground for simplified connection to the device-under-test. The coax on the first channel of each pod is colored blue making it easy to identify. The common ground uses an automotive style connector making it easy to create custom grounds for connecting to the device-under-test. When connecting to square pins, the P6516 has an adapter that attaches to the probe head extending the probe ground flush with the probe tip so you can attach to a header. The P6516 offers outstanding electrical characteristics, applying only 3 pF of loading. 
Triggering on a specific data packet going across an I2C bus. The yellow waveform is clock and the blue waveform is data. A bus waveform provides decoded packet content including Start, Address, Read/Write, Data, and Stop.
Serial Triggering and Analysis (Optional)On a serial bus, a single signal often includes address, control, data, and clock information. This can make isolating events of interest difficult. The MSO/DPO4000 Series offers a robust set of tools for debugging serial buses with automatic trigger, decode, and search for I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, and I2S/LJ/RJ/TDM. Serial TriggeringTrigger on packet content such as start of packet, specific addresses, specific data content, unique identifiers, etc. on popular serial interfaces such as I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, and I2S/LJ/RJ/TDM. Bus DisplayProvides a higher-level, combined view of the individual signals (clock, data, chip enable, etc.) that make up your bus, making it easy to identify where packets begin and end and identifying subpacket components such as address, data, identifier, CRC, etc. Bus DecodingTired of having to visually inspect the waveform to count clocks, determine if each bit is a 1 or a 0, combine bits into bytes, and determine the hex value? Let the oscilloscope do it for you! Once you’ve set up a bus, the MSO/DPO4000 Series will decode each packet on the bus, and display the value in hex, binary, decimal (LIN and FlexRay only), signed decimal (I2S/LJ/RJ/TDM only), or ASCII (RS-232/422/485/UART only) in the bus waveform. 
Event table showing decoded Identifier, DLC, DATA, and CRC for every CAN packet in a long acquisition.
Event TableIn addition to seeing decoded packet data on the bus waveform itself, you can view all captured packets in a tabular view much like you would see in a software listing. Packets are time stamped and listed consecutively with columns for each component (Address, Data, etc.). SearchSerial triggering is very useful for isolating the event of interest, but once you’ve captured it and need to analyze the surrounding data, what do you do? In the past, users had to manually scroll through the waveform counting and converting bits and looking for what caused the event. With the MSO/DPO4000 Series, you can have the oscilloscope automatically search through the acquired data for user-defined criteria including serial packet content. Each occurrence is highlighted by a search mark. Rapid navigation between marks is as simple as pressing the Previous (←) and Next (→) buttons on the front panel. 
Safe operating area measurement. Automated power measurements enable quick and accurate analysis of common power parameters.
Power Analysis (Optional)Ever increasing consumer demand for longer battery-life devices and for green solutions that consume less power require power-supply designers to characterize and minimize switching losses to improve efficiency. In addition, the supply’s power levels, output purity, and harmonic feedback into the power line must be characterized to comply with national and regional power quality standards. Historically, making these and many other power measurements on an oscilloscope has been a long, manual, and tedious process. The MSO/DPO4000 Series optional power analysis tools greatly simplify these tasks, enabling quick and accurate analysis of power quality, switching loss, harmonics, safe operating area (SOA), modulation, ripple, and slew rate (di/dt, dv/dt). Completely integrated into the oscilloscope, the power analysis tools provide automated, repeatable power measurements with a touch of a button; no external PC or complex software setup is required. 
Viewing an NTSC video signal. Notice the intensity-graded view provided by the DPO’s ability to represent time, amplitude, and distribution of amplitude over time.
Video Design and DevelopmentMany video engineers have remained loyal to analog oscilloscopes, believing the intensity gradations on an analog display are the only way to see certain video waveform details. The MSO/DPO4000 Series fast waveform capture rate, coupled with its intensity-graded view of the signal, provides the same information-rich display as an analog oscilloscope, but with much more detail and all the benefits of digital scopes. Standard features such as IRE and mV graticules, holdoff by fields, video polarity, and an Autoset smart enough to detect video signals, make the MSO/DPO4000 Series the easiest to use oscilloscope on the market for video applications. And with up to a 1 GHz bandwidth and four analog inputs, the MSO/DPO4000 Series provides ample performance for analog and digital video use. The MSO/DPO4000 Series video functionality is further extended with the optional DPO4VID video application module. DPO4VID provides the industry's most complete suite of HDTV and custom (nonstandard) video triggers. Designed to Make Your Work Easier
The MSO/DPO4000 is designed to make your work easier. The large, high-resolution display shows intricate signal details. Dedicated front-panel controls simplify operation. A USB host port on the front panel allows you to easily transfer screenshots, instrument settings, and waveform data to a USB thumb drive.
Large, High-resolution DisplayThe MSO/DPO4000 Series features a 10.4 inch (264 mm) XGA color display for seeing intricate signal details. Dedicated Front-panel ControlsPer-channel vertical controls provide simple and intuitive operation. No longer do you need to share one set of vertical controls across all four channels. ConnectivityA USB host port on the front panel enables easy transfer of screenshots, instrument settings, and waveform data to a USB thumb drive. The rear panel contains two additional USB host ports and a USB device port for controlling the oscilloscope remotely from a PC or for connecting a USB keyboard. The USB device port can also be used to print directly to a PictBridge®-compatible printer. An integrated 10/100 Ethernet port enables easy connection to networks and a Video Out port allows the oscilloscope display to be exported to an external monitor or projector. 
The MSO/DPO4000 Series’ compact form factor frees up valuable space on your bench or desktop.
Compact Form FactorA compact, portable form factor allows the MSO/DPO4000 Series to be easily moved between labs and, with a depth of just 5.4 inches (137 mm), it saves you valuable space on your test bench. 
TekVPI probe interface simplifies connecting your probes to the oscilloscope.
TekVPI® Probe InterfaceThe TekVPI probe interface sets the standard for ease of use in probing. TekVPI probes feature status indicators and controls, as well as a probe menu button right on the comp box itself. This button brings up a probe menu on the oscilloscope display with all relevant settings and controls for the probe. The TekVPI interface enables direct attachment of current probes without requiring a separate power supply. TekVPI probes can be controlled remotely through USB, GPIB, or Ethernet, enabling more versatile solutions in ATE environments. 
NI LabVIEW SignalExpress™ Tektronix Edition is a fully interactive measurement acquisition and analysis software developed jointly with National Instruments and optimized for the MSO/DPO Series.
OpenChoice® Desktop software enables seamless connection between the oscilloscope and your PC.
Extended AnalysisAcquiring data and measurements from the MSO/DPO4000 Series is as simple as connecting a USB cable from the oscilloscope to your PC. Key software applications - NI LabVIEW SignalExpress™ Tektronix Edition LE, OpenChoice® Desktop, and Microsoft Excel and Word toolbars – are included standard with each oscilloscope to enable fast and easy direct communication with your Windows PC. NI LabVIEW SignalExpress Tektronix Edition LE enables you to instantly acquire, generate, analyze, compare, import, and save measurement data and signals using an intuitive drag-and-drop user interface that does not require any programming. The optional Professional Version offers over 200 built-in functions that provide additional signal processing, advanced analysis, sweeping, limit testing and user-defined step capabilities. For simple tasks, the included OpenChoice Desktop enables fast and easy communication between the oscilloscope and your PC through USB or LAN for transferring settings, waveforms, and screen images. CharacteristicsVertical System Analog Channels | Characteristic | DPO4034 MSO4034 | DPO4054 MSO4054 | DPO4104 MSO4104 |
|---|
| Input Channels | 4 | 4 | 4 | | Analog Bandwidth (-3 dB) 5 mV/div - 1 V/div | 350 MHz | 500 MHz | 1 GHz | | Calculated Rise Time 5 mV/div (typical) | 1 ns | 700 ps | 350 ps | | Hardware Bandwidth Limits | 20 MHz or 250 MHz | | Input Coupling | AC, DC, GND | | Input Impedance | 1 MΩ ±1%, 50 Ω ±1% | | Input Sensitivity, 1 MΩ | 1 mV/div to 10 V/div | | Input Sensitivity, 50 Ω | 1 mV/div to 1 V/div | | Vertical Resolution | 8 bits (11 bits with Hi Res) | | Max Input Voltage, 1 MΩ | 250 VRMS with peaks ≤ ±400 V | | Max Input Voltage, 50 Ω | 5 VRMS with peaks < ±20 V | | DC Gain Accuracy | ±1.5% with offset set to 0 V | | Channel-to-Channel Isolation | ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth for any two channels having equal volts/div settings |
Offset Range | Range | 1 MΩ | 50 Ω, 75 Ω |
|---|
| 1 mV/div to 50 mV/div | ±1 V | ±1 V | | 50.5 mV/div to 99.5 mV/div | ±0.5 V | ±0.5 V | | 100 mV/div to 500 mV/div | ±10 V | ±10 V | | 505 mV/div to 995 mV/div | ±5 V | ±5 V | | 1 V/div to 5 V/div | ±100 V | ±5 V | | 5.05 V/div to 10 V/div | ±50 V | NA |
Vertical System Digital Channels | Characteristic | All MSO4000 Models |
|---|
| Input Channels | 16 Digital (D15 - D0) | | Thresholds | Per-channel Thresholds | | Threshold Selections | TTL, CMOS, ECL, PECL, User Defined | | User-defined Threshold Range | +5 to -2 V | | Maximum Input Voltage | ±15 V | | Threshold Accuracy | ±(100 mV + 3% of threshold setting) | | Input Dynamic Range | 6 Vp-p centered around the threshold | | Minimum Voltage Swing | 500 mV | | Input Impedance | 20 kΩ | | Probe Loading | 3 pF | | Vertical Resolution | 1 bit |
Horizontal System Analog Channels | Characteristic | DPO4034 MSO4034 | DPO4054 MSO4054 | DPO4104 MSO4104 |
|---|
| Maximum Sample Rate (all channels) | 2.5 GS/s | 2.5 GS/s | 5 GS/s | | Maximum Record Length (all channels) | 10 Mpoints | | Maximum Duration at Highest Sample Rate (all channels) | 4 ms | 4 ms | 2 ms | | Timebase Range | 1 ns to 1,000 s | 400 ps to 1,000 s | | Timebase Delay Time Range | -10 divisions to 5000 s | | Channel-to-Channel Deskew Range | ±100 ns | | Timebase Accuracy | ±5 ppm over any ≥ 1 ms interval |
Horizontal System Digital Channels | Characteristic | All MSO4000 Models |
|---|
| Maximum Sample Rate (Main) | 500 MS/s (2 ns resolution) | | Maximum Record Length (Main) | 10 Mpoints | | Maximum Sample Rate (MagniVu) | 16.5 GS/s (60.6 ps resolution) | | Maximum Record Length (MagniVu) | 10 k points centered around the trigger | | Minimum Detectable Pulse Width | 1.5 ns | | Channel-to-Channel Skew | 60 ps typical |
Trigger System | Characteristic | Description |
|---|
| Main Trigger Modes | Auto, Normal, and Single | | Trigger Coupling | DC, AC, HF reject (attenuates >50 kHz), LF reject (attenuates <50 kHz), noise reject (reduces sensitivity) | | Trigger Holdoff Range | 20 ns to 8 s |
Trigger Sensitivity | Characteristic | Description |
|---|
| Internal DC Coupled | 0.4 div from DC to 50 MHz, increasing to 1 div at rated bandwidth | External (Auxiliary Input) | 200 mV from DC to 50 MHz increasing to 500 mV at 250 MHz |
Trigger Level Range | Characteristic | Description |
|---|
| Any Channel | ±8 divisions from center of screen | External (Auxiliary Input) | ±8 V |
Trigger Modes | Mode | Description |
|---|
| Edge | Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise reject. | | Sequence (B-trigger) | Trigger Delay by Time - 4 ns to 8 s. Or Trigger Delay by Events - 1 to 9,999,999 events. | | Pulse Width | Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time. | | Runt | Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. | | Logic | Trigger when any logical pattern of channels goes false or stays true for specified period of time. Any input can be used as a clock to look for the pattern on a clock edge. Pattern (AND, OR, NAND, NOR) specified for all analog and digital input channels defined as High, Low, or Don’t Care. | | Setup and Hold | Trigger on violations of both setup time and hold time between clock and data present on any of the input channels. | | Rise/Fall Time | Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either. | | Video | Trigger on all lines, odd, even, or all fields on NTSC, PAL, and SECAM video signals. | | Extended Video (Optional) | Trigger on 480p/60, 576p/50, 720p/30, 720p/50, 720p/60, 875i/60, 1080i/50, 1080i/60, 1080p/24, 1080p/24sF, 1080p/25, 1080p/30, 1080p/50, 1080p/60, and custom bi-level and tri-level sync video standards. | | I2C (Optional) | Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I2C buses up to 10 Mb/s. | | SPI (Optional) | Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses up to 10.0 Mb/s. | | CAN (Optional) | Trigger on Start of Frame, Frame Type (data, remote, error, overload), Identifier (standard or extended), Data, Identifier and Data, End of Frame, Missing ACK, or Bit Stuffing Error on CAN signals up to 1 Mb/s. Data can be further specified to trigger on ≤, <, =, >, ≥, or ≠ a specific data value. User-adjustable sample point is set to 50% by default. | | I2S/LJ/RJ/TDM (Optional) | Trigger on Word Select, Frame Sync, or Data. Data can be further specified to trigger on ≤, <, =, >, ≥, ≠ a specific data value, or inside or outside of a range. Maximum data rate for I2S/LJ/RJ is 12.5 Mb/s. Maximum data rate for TDM is 25 Mb/s. | | RS-232/422/485/UART (Optional) | Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Data, Tx Parity Error, and Rx Parity Error up to 10 Mb/s. | | LIN (Optional) | Trigger on Sync, Identifier, Data, Identifier and Data, Wakeup Frame, Sleep Frame, Errors such as Sync, Parity, or Checksum Errors up to 1 Mb/s (by LIN definition, 20 kb/s). | | FlexRay (Optional) | Trigger on Start of Frame, Type of Frame (Normal, Payload, Null, Sync, Startup), Identifier, Cycle Count, Complete Header Field, Data, Identifier and Data, End of Frame or Errors such as Header CRC, Trailer CRC, Null Frame, Sync Frame, or Startup Frame Errors | | Parallel (available on MSO models only) | Trigger on a parallel bus data value. Parallel bus can be from 1 to 16 bits in size. Binary and Hex radices are supported. |
Acquisition Modes | Mode | Description |
|---|
| Sample | Acquire sampled values. | | Peak Detect | Captures glitches as narrow as 2 ns at all sweep speeds. | | Averaging | From 2 to 512 waveforms included in average. | | Envelope | Min-max envelope reflecting Peak Detect data over multiple acquisitions. | | Hi Res | Real-time boxcar averaging reduces random noise and increases vertical resolution. | | Roll | Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div. |
Waveform Measurements | Measurement | Description |
|---|
| Cursors | Waveform and Screen. | | Automatic Measurements | 29, of which up to four can be displayed on screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area and Cycle Area. | | Measurement Statistics | Mean, Min, Max, Standard Deviation. | | Reference Levels | User-definable reference levels for automatic measurements can be specified in either percent or units. | | Gating | Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, or waveform cursors. |
Power Measurements (Optional) | Measurement | Description |
|---|
| Power Quality Measurements | VRMS, VCrest Factor, Frequency, IRMS, ICrest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle. | | Switching Loss Measurements | Power Loss: Ton, Toff, Conduction, Total. | | Energy Loss: Ton, Toff, Conduction, Total. | | Harmonics | THD-F, THD-R, RMS measurements. | | Graphical and table displays of harmonics. | | Test to IEC61000-3-2 Class A and MIL-STD-1399. | | Ripple Measurements | Vripple and Iripple. | | Modulation Analysis | Graphical display of +Pulse Width, -Pulse Width, Period, Frequency, +Duty Cycle, and -Duty Cycle modulation types. | | Safe Operating Area | Graphical display and mask testing of switching device safe operating area measurements. | | dV/dt and dI/dt Measurements | Cursor measurements of slew rate. |
Waveform Math | Characteristic | Description |
|---|
| Arithmetic | Add, subtract, multiply, and divide waveforms. | | Math Functions | Integrate, Differentiate, FFT. | | FFT | Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris. | | Advanced Math | Define extensive algebraic expressions including waveforms, reference waveforms, math functions (FFT, Intg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent), scalars, up to two user-adjustable variables and results of parametric measurements (Period, Freq, Delay, Rise, Fall, PosWidth, NegWidth, BurstWidth, Phase, PosDutyCycle, NegDutyCycle, PosOverShoot, NegOverShoot, PeakPeak, Amplitude, RMS, CycleRMS, High, Low, Max, Min, Mean, CycleMean, Area, CycleArea, and trend plots), e.g.,(Intg(Ch1 - Mean(Ch1)) × 1.414 × VAR1). |
Software | Software | Description |
|---|
| NI LabVIEW SignalExpress Tektronix Edition LE | A fully interactive measurement software environment optimized for the MSO/DPO4000 Series, enables you to instantly acquire, generate, analyze, compare, import, and save measurement data and signals using an intuitive drag-and-drop user interface that does not require any programming. Standard MSO/DPO4000 Series support for acquiring, controlling, viewing, and exporting your live signal data is permanently available through the software. The full version (SIGEXPTE) adds additional signal processing, advanced analysis, mixed signal, sweeping, limit testing, and user-defined step capabilities and is available for a 30-day trial period standard with each instrument. | | OpenChoice® Desktop | Enables fast and easy communication between a Windows PC and the MSO/DPO4000 Series, using USB or LAN. Transfer and save settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis. | | IVI Driver | Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI, Microsoft .NET and MATLAB. | | eScope | Enables control of the MSO/DPO4000 Series over a network connection through a standard web browser. Simply enter the IP address or network name of the oscilloscope and a web page will be served to the browser. |
Display Characteristics | Characteristic | Description |
|---|
| Display Type | 10.4 in. (264 mm) liquid-crystal TFT color display | | Display Resolution | 1,024 horizontal × 768 vertical pixels (XGA) | | Waveform Styles | Vectors, Dots, Variable Persistence, Infinite Persistence | | Graticules | Full, Grid, Cross Hair, Frame, IRE, and mV | | Format | YT and simultaneous XY/YT | | Waveform Capture Rate | >50,000 wfm/s |
Input/Output Ports | Port | Description |
|---|
| CompactFlash Drive | Front-panel access (Type 1) | | USB 2.0 Full-speed Host Port | Supports USB mass storage devices, printers and keyboard. Two ports available on rear panel and one on front panel. | | USB 2.0 High-speed Device Port | Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488, and direct printing to all PictBridge-compatible printers. | | LAN Port | RJ-45 connector, supports 10/100Base-T | | XGA Video Port | DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector | | Auxiliary Input | Front-panel BNC connector. Input Impedance 1 MΩ. Max input 250 VRMS with peaks ±400 V. | | Probe Compensator Output | Front-panel pins Amplitude: 2.5 V Frequency: 1 kHz | | Trigger Out | Rear-panel BNC connector, provides a positive polarity pulse when the oscilloscope triggers | | Kensington Lock | Rear-panel security slot connects to standard Kensington lock |
Power Source | Characteristic | Description |
|---|
| Power Source Voltage | 100 to 240 V ±10% | | Power Source Frequency | 47 to 66 Hz (90 to 264 V) 360 to 440 Hz (100 to 132 V) | | Power Consumption | 250 W maximum |
Physical Characteristics | Dimensions | mm | in. |
|---|
| Height | 229 | 9.0 | | Width | 439 | 17.3 | | Depth | 137 | 5.4 | | Weight | kg | lb. | | Net | 5 | 11 | | Shipping | 9.5 | 22 | | Rackmount Configuration | 5U | | Cooling Clearance | 2 in. (51 mm) required on left side and rear of instrument |
Environmental | Characteristic | Description |
|---|
| Temperature | | Operating | 0 ºC to +50 ºC | | Nonoperating | -20 ºC to +60 ºC | | Humidity | | Operating | High: 40 ºC to 50 ºC, 10% to 60% Relative Humidity Low: 0 ºC to 40 ºC, 10% to 90% Relative Humidity | | Nonoperating | High: 40 ºC to 60 ºC, 5% to 60% Relative Humidity Low: 0 ºC to 40 ºC, 5% to 90% Relative Humidity | | Altitude | | Operating | 3,000 meters (9,843 feet) | | Nonoperating | 12,000 meters (39,370 feet) | | Random Vibration | | Operating | 0.31 GRMS from 5 to 500 Hz, 10 minutes each axis, 3 axes, 30 minutes total | | Nonoperating | 2.46 GRMS from 5 to 500 Hz, 10 minutes each axis, 3 axes, 30 minutes total | | Regulatory | | Electromagnetic Compatibility | 89/336/EEC | | Safety | UL61010-1, Second Edition; CSA61010-1 Second Edition, EN61010-1:2001; IEC 61010-1:2001 |
Ordering InformationMSO/DPO4000 Family | Model | Description |
|---|
| DPO4000 Models | | DPO4034 | 350 MHz, 2.5 GS/s, 10 M record length, 4-channel digital phosphor oscilloscope | | DPO4054 | 500 MHz, 2.5 GS/s, 10 M record length, 4-channel digital phosphor oscilloscope | | DPO4104 | 1 GHz, 5 GS/s, 10 M record length, 4-channel digital phosphor oscilloscope | | MSO4000 Models | | MSO4034 | 350 MHz, 2.5 GS/s, 10 M record length, 4+16 channel mixed-signal oscilloscope | | MSO4054 | 500 MHz, 2.5 GS/s, 10 M record length, 4+16 channel mixed-signal oscilloscope | | MSO4104 | 1 GHz, 5 GS/s, 10 M record length, 4+16 channel mixed-signal oscilloscope |
All models include: One P6139A 500 MHz, 10x Passive Probe per Analog Channel, Front Cover (200-4908-00), User Manual (071-2121-xx), Documentation CD (063-3903-00), OpenChoice® Desktop Software, NI LabVIEW SignalExpress™ Tektronix Edition LE Software, Calibration certificates document measurement traceability to National Metrology Institute(s) - the Quality System this product is manufactured in is ISO9001 registered, power cord, accessory bag (016-1967-00) and a three-year warranty. Please specify power plug and manual version when ordering. MSO models also Include: One P6516 16-channel logic probe and a logic probe accessory kit (020-2662-00). Application Modules | Module | Description |
|---|
| DPO4AUDIO | Audio Serial Triggering and Analysis Module. Enables triggering on packet level information on I2S, LJ, RJ, and TDM audio buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information. | | DPO4AUTO | Automotive Serial Triggering and Analysis Module. Enables triggering on packet level information on CAN and LIN buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information. | | DPO4AUTOMAX | Extended Automotive Serial Triggering and Analysis Module. Enables triggering on packet level information on CAN, LIN, and FlexRay buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, packet decode tables with time stamp information, and eye-diagram analysis software. | | DPO4COMP | Computer Serial Triggering and Analysis Module. Enables triggering on packet level information on RS-232/422/485/UART buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information. | | DPO4EMBD | Embedded Serial Triggering and Analysis Module. Enables triggering on packet level information on I2C and SPI buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information. | | DPO4PWR | Power Analysis Application Module. Enables quick and accurate analysis of power quality, switching loss, harmonics, safe operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt). | | DPO4VID | HDTV and Custom (nonstandard) Video Triggering Module. |
Instrument OptionsPower Plug Options | Option | Description |
|---|
| Opt. A0 | North America | | Opt. A1 | Universal Euro | | Opt. A2 | United Kingdom | | Opt. A3 | Australia | | Opt. A5 | Switzerland | | Opt. A6 | Japan | | Opt. A10 | China | | Opt. A11 | India | | Opt. A99 | No power cord or AC adapter |
Language Options*1 | Option | Description |
|---|
| Opt. L0 | English manual | | Opt. L1 | French manual | | Opt. L2 | Italian manual | | Opt. L3 | German manual | | Opt. L4 | Spanish manual | | Opt. L5 | Japanese manual | | Opt. L6 | Portuguese manual | | Opt. L7 | Simplified Chinese manual | | Opt. L8 | Standard Chinese manual | | Opt. L9 | Korean manual | | Opt. L10 | Russian manual | | Opt. L99 | No manual |
*1 Language options include a translated front-panel overlay for the selected language(s). Service Options*2 | Option | Description |
|---|
| Opt. C3 | Calibration Service 3 years | | Opt. C5 | Calibration Service 5 years | | Opt. CA1 | Provides a single calibration event, or coverage for the designated calibration interval, whichever comes first. | | Opt. D1 | Calibration Data Report | | Opt. D3 | Calibration Data Report 3 years (with Opt. C3) | | Opt. D5 | Calibration Data Report 5 Years (with Opt. C5) | | Opt. R5 | Repair Service 5 years (including warranty) |
*2 Probes and accessories are not covered by the oscilloscope warranty and service offerings. Refer to the datasheet of each probe and accessory model for its unique warranty and calibration terms. Recommended Probes | Probe | Description |
|---|
| TAP1500 | 1.5 GHz TekVPI® active probe | | TAP1500X2 | Bundle of Two 1.5 GHz Active Probes, single-ended with TekVPI Interface; Certificate of traceable calibration standard | | TDP0500 | 500 MHz TekVPI 42 V differential probe | | TDP1000 | 1 GHz TekVPI 42 V differential probe | | TCP0030 | 120 MHz TekVPI 30 Ampere AC/DC current probe | | TCP0150 | 20 MHz TekVPI 150 Ampere AC/DC current probe | | TCPA300/400*3 | Current measurement systems | | P5200 | 1.3 kV, 25 MHz high-voltage differential probe | | P5205*3 | 1.3 kV, 100 MHz high-voltage differential probe | | P5210*3 | 5.6 kV, 50 MHz high-voltage differential probe | | P5100 | 2.5 kV, 100X high-voltage passive probe | | ADA400A*3 | 100X, 10X, 1X, 0.1X high-gain differential amplifier | | NEX-HD2HEADER | Mictor connector breakout to 0.1 in. header pins | | DPO4PWRBND Power Solution Bundle | Includes P5205 and TDP0500 differential voltage probes, TCP0030 current probe, TPA-BNC adapter, deskew pulse generator (TEK-DPG), deskew fixture, and power analysis module (DPO4PWR) in a hard-sided carrying case. Bundle discount reflected in price. |
*3 Requires TekVPI® to TekProbe BNC adapter (TPA-BNC). Recommended Accessories | Accessory | Description |
|---|
| 071-1844-XX | Service Manual (English only) | | SIGEXPTE | NI LabVIEW SignalExpress™ Tektronix Edition Software (Full Version) | | FPGAView-xx | MSO Support for Altera and Xilinx FPGAs | | TPA-BNC | TekVPI to TekProbe BNC Adapter | | TEK-USB-488 | GPIB to USB Adapter | | TLAHRA with (2) 196-3476-01 | High-impedance Adapter and Leadsets for P6516 MSO Probe | | 119-6827-00 | CompactFlash to USB Memory Card Reader | | ACD4000 | Soft Transit Case | | HCTEK4321 | Hard Transit Case (Requires ACD4000) | | RM4000 | Rackmount Kit | | AMT75*3 | 1 GHz, 75 Ω Adapter | | TEK-DPG | Deskew Pulse Generator | | 067-1686-00 | Deskew Fixture
|
*3 Requires TekVPI® to TekProbe BNC adapter (TPA-BNC). Warranty Three-year warranty covering all parts and labor, excluding probes.
 |
 | Product(s) are manufactured in ISO registered facilities.
|
 | Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
|
3GT-20156-5, 23-JUN-2009
|
|
 |
(網站 ID: 13296)
|
