|
|
|
Generadores de funciones/arbitrarios
AFG3011 • AFG3021B • AFG3022B • AFG3101 • AFG3102 • AFG3251 •
AFG3252
|
Características y beneficios- Formas de onda sinusoidales de 25 MHz, 100 MHz ó 240 MHz
- Formas de onda arbitrarias de 14 bits, 250 MS/s, 1 GS/s ó 2 GS/ss
- Amplitude up to 20 Vp-p into 50 Ω loads
- La pantalla de 5,6" proporciona una gran confianza en los ajustes y en el aspecto final de la forma de onda
- El interfaz intuitivo y en varios idiomas ahorra el tiempo de configuración
- Generación de pulsos con ajuste de los tiempos de subida/bajada
- Modulaciones FM, PM, FSK y PWM
- Barrido de frecuencia y generación de trenes de pulsos
- Los modelos de 2 canales ahorran espacio y dinero
- El conector USB del panel frontal permite almacenar formas de onda en dispositivos externos de memoria
- Interfaces: USB, GPIB and LAN
- LabVIEW and LabWindows/IVI-C drivers
Aplicaciones- Diseño y prueba electrónicos
- Simulación de sensor
- Pruebas de funcionamiento
- Enseñanza y formación
Descripción del productoSu incomparable rendimiento, versatilidad, funcionamiento intuitivo y precio asequible hacen que los generadores de funciones, de formas de ondas arbitrarias y de pulsos de la serie AFG3000 sean los instrumentos más útiles del mercado al que van dirigidos. Versatilidad y rendimiento superiorLos usuarios pueden elegir entre 12 formas de onda estándar distintas. Las formas de onda arbitrarias se pueden generar con una longitud de hasta 128 K a velocidades de muestreo elevadas. En el caso de la generación de pulsos, el tiempo de transición de los flancos de subida y bajada se pueden ajustar de manera independiente. Las señales externas se pueden conectar y añadir a la señal de salida. Los modelos de dos canales pueden generar dos señales idénticas o completamente distintas. Todos los instrumentos disponen de una base de tiempo altamente estable con una deriva de tan solo ±1 ppm al año. La interfaz de usuario es muy intuitiva y presenta al usuario más información de forma simultáneaUna pantalla de gran tamaño muestra simultáneamente los parámetros más relevantes de la forma de onda seleccionada así como su representación gráfica. Esto permite confiar plenamente en los ajustes de la señal y concentrarse en la tarea que se está llevando a cabo. Las teclas de acceso rápido proporcionan acceso directo a los parámetros y funciones utilizados con más frecuencia. Se pueden seleccionar otras teclas según su conveniencia a través de una serie de menús claramente estructurados. Esto reduce el tiempo que se emplea en aprender y más tarde en tratar de recordar el funcionamiento del instrumento. Por otra parte, el aspecto es idéntico al de los osciloscopios más populares del mundo, los TDS3000. Incluye el software ArbExpress™ para poder crear fácilmente formas de ondaCon este programa para PC, las formas de onda se pueden importar perfectamente desde cualquier osciloscopio Tektronix; o bien, se pueden definir utilizando las funciones estándar, el editor de ecuaciones y operaciones matemáticas. CharacteristicsAFG3000 Series Characteristics | Model | AFG3011 | AFG3021B / AFG3022B | AFG3101 / AFG3102 | AFG3251 / AFG3252 |
|---|
| Channels | 1 | 1 / 2 | 1 / 2 | 1 / 2 | | Waveforms | Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise & Decay, Gaussian, Lorentz, Haversine, DC, Noise | | Sine Wave | 1 µHz to 10 MHz | 1 µHz to 25 MHz | 1 µHz to 100 MHz | 1 µHz to 240 MHz | | Sine Wave in Burst Mode | 1 µHz to 5 MHz | 1 µHz to 12.5 MHz | 1 µHz to 50 MHz | 1 µHz to 120 MHz | | Effective maximum frequency out | 10 MHz | 25 MHz | 100 MHz | 240 MHz | | Amplitude Flatness (1 Vp-p) | | <5 MHz | ±0.15 dB | ±0.15 dB | ±0.15 dB | ±0.15 dB | | 5 MHz to 10 MHz | ±0.3 dB | — | — | — | | 5 MHz to 20 MHz | — | ±0.3 dB | ±0.3 dB | ±0.3 dB | | 20 MHz to 25 MHz | — | ±0.5 dB | ±0.3 dB | ±0.3 dB | | 25 MHz to 100 MHz | — | — | ±0.5 dB | ±0.5 dB | | 100 MHz to 200 MHz | — | — | — | ±1.0 dB | | 200 MHz to 240 MHz | — | — | — | ±2.0 dB | | Harmonic Distortion (1 Vp-p) | | 10 Hz to 20 kHz | <–60 dBc | <–70 dBc | <–60 dBc | <–60 dBc | | 20 kHz to 1 MHz | <–55 dBc | <–60 dBc | <–60 dBc | < -60 dBc | | 1 MHz to 5 MHz | <–45 dBc | <–50 dBc | <–50 dBc | <–50 dBc | | 5 MHz to 10 MHz | <–45 dBc | <–50 dBc | <–37 dBc | <–37 dBc | | 10 MHz to 25 MHz | — | <–40 dBc | <–37 dBc | <–37 dBc | | >25 MHz | — | — | <–37 dBc | <–30 dBc | | THD | <0.2% (10 Hz – 20 kHz, 1 Vp-p) | | Spurious (1 Vp-p) | | 10 Hz to 1 MHz | <–60 dBc | <–60 dBc | <–60 dBc | <–50 dBc | | 1 MHz to 10 MHz | <–50 dBc | — | — | — | | 1 MHz to 25 MHz | — | <–50 dBc | <–50 dBc | <–47 dBc | | >25 MHz | — | — | <–50 dBc + 6 dBc/octave | <–47 dBc + 6 dBc/octave | | Phase Noise, typical | <–110 dBc/Hz at 10 MHz, 10 kHz offset, 1 Vp-p | <–110 dBc/Hz at 20 MHz, 10 kHz offset, 1 Vp-p | | Residual Clock Noise | –63 dBm | –63 dBm | –57 dBm | –57 dBm | | Square Wave | 1 µHz to 5 MHz | 1 µHz to 12.5 MHz | 1 µHz to 50 MHz | 1 µHz to 120 MHz | | Rise/Fall Time | ≤50 ns | ≤18 ns | ≤5 ns | ≤2.5 ns | | Jitter (rms), typical | 500 ps | 500 ps | 200 ps | 100 ps | | Ramp Wave | 1 µHz to 100 kHz | 1 µHz to 250 kHz | 1 µHz to 1 MHz | 1 µHz to 2.4 MHz | | Linearity, typical | ≤0.2% of peak output | ≤0.1% of peak output | ≤0.15% of peak output | ≤0.2% of peak output | | Symmetry | 0.0% to 100.0%. | 0.0% to 100.0%. | | Pulse Wave | 1 mHz to 5 MHz | 1 mHz to 12.5 MHz | 1 mHz to 50 MHz | 1 mHz to 120 MHz | | Pulse Width | 80.00 ns to 999.99 s | 30.00 ns to 999.99 s | 8.00 ns to 999.99 s | 4.00 ns to 999.99 s | | Resolution | 10 ps or 5 digits | | Pulse Duty | 0.001% to 99.999% (Limitations of Pulse Width Apply) | | Edge Transition Time | 50 ns to 625 s | 18 ns to 625 s | 5 ns to 625 s | 2.5 ns to 625 s | | Resolution | 10 ps or 4 digits | 10 ps or 4 digits | | Lead Delay | | | | Range | (Continuous Mode): 0 ps to Period (Triggered/Gated Burst Mode): 0 ps to Period – [Pulse Width + 0.8 *(Leading Edge Time + Trailing Edge Time)] | | Resolution | 10 ps or 8 digits | | Overshoot, typical | <5% | | Jitter (rms, typical) | 500 ps | 500 ps | 200 ps | 100 ps | | Other Waveforms | 1 µHz to 100 kHz | 1 µHz to 250 kHz | 1 µHz to 1 MHz | 1 µHz to 2.4 MHz | | Noise Bandwidth (–3 dB) | 10 MHz | 25 MHz | 100 MHz | 240 MHz | | Noise Type | White Gaussian | | DC (into 50 Ω) | –10 V to +10 V | –5 V to +5 V | –5 V to +5 V | –2.5 V to +2.5 V | | Arbitrary Waveforms | 1 mHz to 5 MHz | 1 mHz to 12.5 MHz | 1 mHz to 50 MHz | 1 mHz to 120 MHz | | Arbitrary Waveforms in Burst Mode | 1 mHz to 2.5 MHz | 1 mHz to 6.25 MHz | 1 mHz to 25 MHz | 1 mHz to 60 MHz | | Effective Analog Bandwidth (–3 db) | 8 MHz | 34 MHz | 100 MHz | 225 MHz | | Non-volatile memory | 4 waveforms | 4 waveforms | 4 waveforms | 4 waveforms | | Memory: Sample rate | 2 to 128 K: 250 MS/s | 2 to 128 K: 250 MS/s | >16 K to 128 K: 250 MS/s 2 to 16 K: 1 GS/s | >16 K to 128 K: 250 MS/s 2 to 16 K: 2 GS/s | | Vertical resolution | 14 bits | 14 bits | 14 bits | 14 bits | | Rise Time/Fall Time | ≤80 ns | ≤20 ns | ≤8 ns | ≤3 ns | | Jitter (rms) | 4 ns | 4 ns | 1 ns at 1 GS/s 4 ns at 250 MS/s | 500 ps at 2 GS/s 4 ns at 250 MS/s | | Amplitude, 50 Ω Load | 20 mVp-p to 20 Vp-p | 10 mVp-p to 10 Vp-p | 20 mVp-p to 10 Vp-p | ≤200 MHz: 50 mVp-p to 5 Vp-p >200 MHz: 50 mVp-p to 4 Vp-p | | Amplitude, Open Circuit | 40 mVp-p to 40 Vp-p | 20 mVp-p to 20 Vp-p | 40 mVp-p to 20 Vp-p | ≤200 MHz: 100 mVp-p to 10 Vp-p >200 MHz: 100 mVp-p to 8 Vp-p | | Accuracy | ±(2% of setting +2 mV) (1 kHz sine wave, 0 V offset, >20 mVp-p amplitude) | ±(1% of setting +1 mV) (1 kHz sine wave, 0 V offset, >10 mVp-p amplitude) | | Resolution | 0.1 mVp-p, 0.1 mVRMS, 1 mV, 0.1 dBm or 4 digits | | Units | Vp-p, VRMS, dBm (sine wave only) | | Output Impedance | 50 Ω | | Load Impedance Setting | Selectable: 50 Ω, 1Ω to 10.0 kΩ, High Z (adjusts displayed amplitude according to selected load impedance) | | Isolation | 42 Vpk maximum to earth | | Short-Circuit Protection | Signal outputs are robust against permanent shorts against floating ground | | External Voltage Protection | To protect signal outputs against external voltages use fuse adapter 013-0345-00 | | DC Offset Range, 50 Ω Load | ±(10 Vpk – Amplitudepp/2) | ±(5 Vpk --Amplitudepp/2) | ±5 Vpk DC | ±2.5 Vpk DC | | DC Offset Range, Open Circuit | ±(20 Vpk – Amplitudepp/2) | ±(10 Vpk --Amplitudepp/2) | ±10 Vpk DC | ±5 Vpk DC | | Accuracy | ±(2% of |setting| + 10 mV + 1% of amplitude (Vp-p)) | ±(1% of |setting| + 5 mV + 0.5% of amplitude (Vp-p)) | | Resolution | 1 mV |
ModulationAM, FM, PM | Carrier Waveforms | All, except Pulse, Noise and DC | | Source | Internal/External | | Internal Modulating Waveform | Sine, square, ramp, noise, ARB (AM: maximum waveform length 4,096; FM/PM: maximum waveform length 2,048) | | Internal Modulating Frequency | 2 mHz to 50.00 kHz | | AM Modulation Depth | 0.0% to +120.0% | | Min FM Peak Deviation | DC | | Max FM Peak Deviation | See chart, below |
Modulation: Max FM Peak Deviation | | AFG3011 | AFG3021B / AFG3022B | AFG3101 / AFG3102 | AFG3251 / AFG3252 |
|---|
| Sine | 5 MHz | 12.5 MHz | 50 MHz | 120 MHz | | Square | 2.5 MHz | 6.25 MHz | 25 MHz | 60 MHz | | ARB | 2.5 MHz | 6.25 MHz | 25 MHz | 60 MHz | | Others | 50 kHz | 125 kHz | 500 kHz | 1.2 MHz |
PM Phase Deviation - 0.0° to +180.0°. Frequency Shift Keying | Carrier Waveforms | All, except Pulse, Noise, and DC | | Source | Internal/External | | Internal Modulating Frequency | 2 mHz to 1.000 MHz | | Number of Keys | 2 |
Pulse Width Modulation | Carrier Waveform | Pulse | | Source | Internal/External | | Internal Modulating Waveform | Sine, square, ramp, noise, ARB (maximum waveform length 2,048) | | Internal Modulating Frequency | 2 mHz to 50.00 kHz | | Deviation | 0% to 50.0% of pulse period |
Sweep| Waveforms | All, except Pulse, Noise, and DC | | Type | Linear, logarithmic | | Sweep Time | 1 ms to 300 s | | Hold/Return Time | 0 ms to 300 s | | Max Total Sweep Time | 300 s | | Resolution | 1 ms or 4 digits | | Total Sweep Time Accuracy, typical | ≤0.4% | | Min Start/Stop Frequency | All except ARB: 1 µHz, ARB: 1 mHz | | Max Start/Stop Frequency | See chart, below |
Sweep: Max Start/Stop Frequency | | AFG3011 | AFG3021B / AFG3022B | AFG3101 / AFG3102 | AFG3251 / AFG3252 |
|---|
| Sine | 10 MHz | 25 MHz | 100 MHz | 240 MHz | | Square | 5 MHz | 12.5 MHz | 50 MHz | 120 MHz | | ARB | 5 MHz | 12.5 MHz | 50 MHz | 120 MHz | | Others | 100 kHz | 250 kHz | 1 MHz | 2.4 MHz |
Burst | Waveforms | All, except Noise and DC | | Type | Triggered, gated (1 to 1,000,000 cycles or Infinite) | | Internal Trigger Rate | 1 μs to 500.0 s | | Gate and Trigger Sources | Internal, external, remote interface |
Auxiliary Inputs | Modulation Inputs Channel 1, Channel 2 | | | Input Range | All except FSK: ±1 V FSK: 3.3 V logic level | | Impedance | 10 kΩ | | Frequency Range | DC to 25 kHz (122 KS/s) | | External Triggered/Gated Burst Input | | | Level | TTL compatible | | Impedance | 10 kΩ | | Pulse Width | 100 ns minimum | | Slope | Positive/Negative, selectable | | Trigger Delay | 0.0 ns to 85.000 s | | Resolution | 100 ps or 5 digits | | Jitter (rms), typical | Burst: <500 ps (Trigger input to signal output) | | 10 MHz Reference Input | | | Impedance | 1 kΩ, AC coupled | | Required Input Voltage Swing | 100 mVp-p to 5 Vp-p | | Lock Range | 10 MHz ±35 kHz | | External Channel 1 Add Input | AFG3101, AFG3102, AFG3251, AFG3252 only | | Impedance | 50 Ω | | Input Range | –1 V to +1 V (DC + peakAC) | | Bandwidth | DC to 10 MHz (–3 dB) at 1 Vp-p |
Auxiliary Outputs | Channel 1 Trigger Output | | | Level | Positive TTL level pulse into 1 kΩ | | Impedance | 50 Ω | | Jitter (rms), typical | AFG3011/21B/22B: 500 ps AFG3101/02: 200 ps AFG3251/52: 100 ps | | Max Frequency | 4.9 MHz (4.9 MHz to 50 MHz: a fraction of the frequency is output; >50 MHz: no signal is output) | | 10 MHz Reference Out | AFG3101, AFG3102, AFG3251, AFG3252 only | | Impedance | 50 Ω, AC coupled | | Amplitude | 1.2 Vp-p into 50 Ω load |
Common Characteristics| Frequency Setting Resolution | 1 μHz or 12 digits | | Phase (except DC, Noise, Pulse) | | | Range | –180° to +180° | | Resolution | 0.01° (sine), 0.1° (other waveforms) | | Internal Noise Add | When activated, output signal amplitude is reduced to 50% | | Level | 0.0% to 50% of amplitude (Vp-p) setting | | Resolution | 1% | | Main Output | 50 Ω | | Effective Frequency Switching Speed | 2 ms via remote control (sequencing not available) | | Internal Frequency Reference | | | Stability | All except ARB: ±1 ppm, 0 °C to 50 °C ARB: ±1 ppm ± 1 µHz, 0 °C to 50 °C | | Aging | ±1 ppm per year | | Remote Programming | GPIB, LAN 10BASE-T / 100BASE-TX, USB 1.1 Compatible with SCPI-1999.0 and IEEE 488-2 standards. | | Configuration Times, typical | USB | LAN | GPIB | | Function Change | 95 ms | 103 ms | 84 ms | | Frequency Change | 2 ms | 19 ms | 2 ms | | Amplitude Change | 60 ms | 67 ms | 52 ms | | Select User ARB | 88 ms | 120 ms | 100 ms | | Data Download Time for 4000 point waveform data, typical | 20 ms | 84 ms | 42 ms | | Power Source | 100 to 240 V, 47 to 63 Hz, or 115 V, 360 to 440 Hz | | Power Consumption | Less than 120 W | | Warm-up Time, typical | 20 minutes | | Power On Self Calibration, typical | <16 s | | Acoustic Noise, typical | <50 dBA | | Display | AFG3021B: 5.6" Monochrome LCD | | All others: 5.6" Color LCD | | User Interface and Help Language | English, French, German, Japanese, Korean, Simplified and Traditional Chinese, Russian (user selectable) |
Physical Characteristics Benchtop Configuration | Dimensions | mm | in. |
|---|
| Weight | kg | lbs. |
|---|
| Height | 156.3 | 6.2 | | Width | 329.6 | 13.0 | | Depth | 168.0 | 6.6 | | Net | 4.5 | 9.9 | | Shipping | 5.9 | 12.9 |
Environmental & Safety Characteristics | Temperature | | | Operating | 0 °C to +50 °C | | Nonoperating | –30 °C to +70 °C | | Humidity | | | Operating | At or below +40 °C: ≤80% >+40 °C to 50 °C: ≤60% | | Altitude | Up to 10,000 feet/3,000 m | | EMC Compliance | | | European Union | EN 61326:1997 Class A EN 61000-3-2:2000, and EN 61000-3-3:1995 IEC 61000-4-2:1999, -4-3:2002, -4-4:2004, -4-5:2005, -4-6:2003, -4-11:2004 | | Australia | EN 61326:1997 | | Safety | UL 61010-1:2004 CAN/CSA C22.2 No. 61010-1:2004 IEC 61010-1:2001 |
Ordering InformationAFG3011, AFG3021B, AFG3022B, AFG3101, AFG3102, AFG3251, AFG3252Arbitrary/Function Generator Includes: Quick-start user manual, power cord, USB cable, CD-ROM with programmer manual, service manual, LabView and IVI drivers, CD-ROM with ArbExpress™ software, NIST-traceable calibration certificate. Please specify power plug when ordering. International Power Plugs| Opt. A0 | North America power | | Opt. A1 | Universal EURO power | | Opt. A2 | United Kingdom power | | Opt. A3 | Australia power | | Opt. A5 | Switzerland power | | Opt. A6 | Japan power | | Opt. A10 | China power | | Opt. A11 | India power | | Opt. A99 | No power cord or AC adapter |
Manual OptionsNote: Includes front panel overlay. | Opt. L0 | English (071-1631-xx) | | Opt. L1 | French (071-1632-xx) | | Opt. L2 | Italian (071-1669-xx) | | Opt. L3 | German (071-1633-xx) | | Opt. L4 | Spanish (071-1670-xx) | | Opt. L5 | Japanese (071-1634-xx) | | Opt. L7 | Simple Chinese (071-1635-xx) | | Opt. L8 | Traditional Chinese (071-1636-xx) | | Opt. L9 | Korean (071-1637-xx) | | Opt. L10 | Russian (071-1638-xx) | | Opt. L99 | No manual |
Service| Opt. C3 | Calibration Service 3 Years | | Opt. C5 | Calibration Service 5 Years | | Opt. CA1 | Single calibration event or coverage for the designated calibration interval, whichever comes first | | Opt. D1 | Calibration Data Report | | Opt. D3 | Calibration Data Report 3 Years (with Option C3) | | Opt. D5 | Calibration Data Report 5 Years (with Option C5) | | Opt. R5 | Repair Service 5 Years |
WarrantyThree year warranty on parts and labor. Recommended Accessories| Rackmount Kit | RM3100 | | Fuse adapter, BNC-P to BNC-R | 013-0345-00 | | Fuse set, 3 pcs, 0.125 A. | 159-0454-00 | | BNC cable shielded, 3 ft. | 012-0482-00 | | BNC cable shielded, 9 ft. | 012-1256-00 | | GPIB cable, double shielded | 012-0991-00 |
BNC Fuse Adapter and 0.125 A Fuse
 |
 | Product(s) are manufactured in ISO registered facilities.
|
 | Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
|
76W-18656-3
|
|
 |
(WebID: 13567)
|
