Features & Benefits
- Enables 80SJNB – The Advanced
Jitter, Noise, and BER Analysis Software
- Provides Trigger
on Repetitive Patterns from 2 to 223 Bits Long
- Provides Buffered Clock Output for Input to a Phase Reference Module
or other Devices
- Accepts Clock from Clock Recovery Circuits
(CR) in the 80A05 and 80A07 Electrical Clock Recovery Modules, and
in the Optical Modules
- Optional SlotSaver Adapter Provides
Power and Control of the PatternSync Trigger Modules, External to
the Mainframe, Saving Space for Additional Channels
Applications
- When Used in Combination
with 80SJNB: Characterizing Jitter, Noise, and BER Performance of
High-speed Serial Designs from 1 Gb/s to 60 Gb/s Data Rates
- Design Validation and Testing of Next-generation High-speed Serial
Data Computer and Communications Components and Systems
- When
Used in Combination with 80SJNB: Jitter, Noise, and BER Analysis of
Multi-gigabit Standards such as Fibre Channel, OIF CEI, XFP, UXPi,
SATA, PCI, Physical Layer, XAUI, Gigabit Ethernet, Rapid I/O, InfiniBand,
and Other Electrical or Optical Circuits
- Enables Capture
of Bits in a Repetitive Pattern for Bit Analysis When Only a Clock
is Available for Triggering
- Enables FrameScan™ of Repetitive
Patterns When Only a Clock Signal is Available for Triggering
*1 Also compatible with TDS/CSA8200, TDS/CSA8000B,
and TDS/CSA8000 sampling oscilloscopes.
PatternSync
Trigger Module
80A06 PatternSync Trigger module is required
for the DSA8200 Series when using 80SJNB advanced Jitter, Noise, and
BER Analysis software package. When this module is used with the 82A04
Phase Reference module, the jitter floor is ≤200 fsRMS.
The PatternSync Trigger Module is programmable to pattern lengths
of up to 223 bits and accepts a user-supplied clock signal
from 150 MHz to 12.75 GHz. The DSA8200 UI/PI for the 80A06 module
offers pattern lengths from 2 to 223 bits and programs
the module to within it's hardware range (a prescaler followed by
a counter with minimum count of 30) for the least-common-multiple
count.
Characteristics
Acquisition Modes - Standard, triggered phase reference, and FrameScan™
Compatible
Mainframes - DSA8200, TDS/CSA8200, TDS/CSA8000B, and TDS/CSA8000
Mainframe Resources Required - One small (electrical)
module slot, or TRIGGER PROBE POWER connector on the front panel of
the oscilloscope (with available SlotSaver cable)
General
Specifications
Input/Output Connectors - Precision
18 GHz SMA female connector
Input and Output Impedance
- 50 Ω
Absolute Maximum Input Voltage - 2.0 Vpk-pk
Maximum DC Offset - ±5.0 VDC
Input Electrical Return Loss -
>15 dB (50 MHz to 10 GHz)
>10 dB (10 GHz to 20 GHz)
Input/Output Coupling
-
CLOCK IN: AC
CLOCK OUT: AC
TRIGGER OUT: DC
Supported Clock Rates -
Minimum: 150 MHz
Maximum: 12.5 GHz, 12.75 GHz (typical)
Prescaler
Ratios -
Input clock (as selected in the UI/PI)
150 MHz
to 3.5 GHz: 4
3.5 GHz to 7 GHz: 8
7 GHz to 12.75 GHz:
16
Programmable Pattern Length -
Minimum:
2
Maximum: 223 (8,388,608)
Front-panel
Output Amplitudes -
CLOCK OUT output (50 Ω AC coupled)
150 MHz to 8.0 GHz: 500 mVpk-pk (typical)
8.0 GHz
to 12.75 GHz: 250 mVpk-pk (typical)
TRIGGER OUT
output (50 Ω DC coupled, ground referenced)
Output High Level:
0 V
Output Low Level: -550 mV (typical)
Front-panel
Output Rise and Fall Times -
CLOCK OUT: <60 ps (faster
for fast input slew rate)
TRIGGER OUT: <60 ps (faster for
fast input slew rate)
System Jitter -
DSA8200,
TDS/CSA8200, and TDS/CSA8000B with 80A06: <1.3 psRMS, 850 fs RMS (typical)
TDS/CSA8000 with 80A06:
<1.6 psRMS, 1.0 psRMS (typical)
DSA8200
and TDS/CSA8200 with 80A06 and 82A04: ≤200 fsRMS (determined
by the 82A04, see 82A04 data sheet for more details).
Minimum Input Sensitivity - 200 mVpk-pk
Environmental and Mechanical
|
Dimensions
|
mm
|
in.
|
|
Height
|
25
|
1.0
|
|
Width
|
79
|
3.1
|
|
Depth
|
135
|
5.3
|
|
Weight
|
kg
|
lb.
|
|
Net
|
0.4
|
0.6
|
Environmental Conditions - Refer to the host
instrument specification.
Electromagnetic - Refer to
the host instrument specification.
Ordering Information
80A06
PatternSync
Trigger Module
Includes: User manual, 2 each 12 in.
SMA cables (174-1364-xx).
Service Options
Opt.
D1 - Calibration data reports.
Opt. R3. - Extend
repair warranty to three years.
Accessories
Sampling
Module Extender Cable (2 meter length) - Order 80N01.
SlotSaver Adapter Extender Cable - Brings power and control to
the 80A06 when operated externally from the DSA mainframe, saving
slot space (compatible with 80A06 and 80A02). Order 174-5230-xx.
